Formlabs Form Cure V2 120V UV Post-Curing Unit with Temperature Con...
税込価格
Fast, High-Precision Industrial Post-Curing
The Form Cure V2 120V is a UV post-curing unit with temperature control specifically designed for post-processing (post-curing) after SLA printing. By combining a high-power LED array and convection heating, it precisely controls 405 nm light and heat to consistently enhance the mechanical properties of parts.
Form 4 series prints can be post-cured in as little as 60 seconds. In addition to improving strength, toughness, and heat resistance, it achieves a harder, less sticky surface finish.
Key Features
Fast UV irradiation and rapid heating allow for uniform post-curing under validated conditions. It supports large Form 4 prints, reducing process time.
- Fast Curing: General-purpose resins in as little as 60 seconds, engineering resins in a short time
- Temperature Control: Heats up quickly, supports up to 100°C
- Uniform Irradiation: LED array provides stable results with minimal unevenness
- Size Compatibility: Chamber designed for Form 4 prints
Utilize material-specific presets to achieve highly reproducible curing conditions. The easy-to-clean design simplifies daily maintenance.
Reproducibility of Finish
Product Specifications
| Item | Specification |
|---|---|
| Compatible Printers | Form 4, Form 4B, Form 3/+, Form 3B/+, Form 2 |
| External Dimensions | 33.7 × 40.4 × 37.2 cm 13.3 × 14.0 × 15.9 in |
| Weight | 12.1 kg 26.7 lb |
| Wash Bucket Volume | 14.4 |
| Maximum Part Size | 20.0 × 14.5 × 19.5 cm |
| Operating Environment | Recommended 18°C – 28°C |
| Agitation Method | Magnetic Impeller |
| Accessories | Wash bucket, wash basket, hydrometer, build platform stand (2) |
| Power Requirements | 90–240 V; 2.0 A; 50/60 Hz; 50 W |
| Compatible Solvents | IPA, TPM, Water, Formlabs Resin Washing Solution |