Bambu Lab | Product Model: BL0061_175mm_500g

Bambu Lab PA/PET Support Material - Green

Name: Bambu Lab PA/PET Support Material - Green
Brand: Bambu Lab
SKU: BL0061_175mm_500g
Price: 8000 JPY
Availability: InStock

¥8,000 JPY

Subtotal —

Bambu Lab PA/PET Support Material - Green is backordered and will ship as soon as it is back in stock.

Choose add-on

Bambu Lab PA/PET Support Material - Green

Product Features

• Easy manual disassembly • Perfect surface support • Recommended for PAHT-CF, PA6-CF, PET-CF, PA-GF, and other materials • Comes with a high-temperature reusable spool • Diameter: 1.75mm +/- 0.03mm

Precautions for use

• For surface support only. • Not for use alone for printing models. • Must be dried before use. • Compatible with AMS.

RFID Smart Printing

All printing parameters are embedded in RFID and can be read via our AMS (Automated Material System). Load and print! No more tedious setup steps required.

Printing Techniques

PA/PET supports need to be properly dried before printing: it is recommended to dry them in a drying oven at 80°C for 8 hours, or on a heated bed at 90°C for 10 hours.

Bambu Lab PLA support & PA/PET support comparison

	Support for PLA	Support for PA/PET
color	white	green
Nozzle temperature	210-230°C	270-290°C
Heated bed temperature	35-45°C	80-100°C
Printing speed	<200mm/s	<100mm/s
Is it water-soluble?	no	no
Recommended for use	PLA	PAHT-CF,PA6-CF,PA-CF, PA-GF, PET-CF
Not recommended for use	PA-CF, PA-GF, PET-CF, ABS, PETG, TPU, ASA	PLA, ABS, PETG, TPU, ASA

1. The support filament cannot be used alone to print an item; it should only be used to print the supporting portion of that item. It is recommended to use AMS for multi-material printing using the Bambu support filament.
2. Bambu support cables can only be used with compatible temperatures and cable types. Failure to follow these guidelines may result in clogging or other problems.

Packaging contents

Wire + spool *1 & Desiccant *1

Cable label *1

Outer box *1

diameter	1.75 mm
Net weight of wire	0.5 kg
spool material	PC+ABS (temperature resistant to 90°C )
spool size	Diameter : 200 mm; Height: 67 mm
Pre- print drying settings	80 °C, 8-12 hours
Printing and storing humidity	< 20% RH (sealed with desiccant)
Nozzle temperature	190 - 230 ̊C
Printing plate type	Engineering panels, high-temperature printing platforms, or textured PEI boards
Printing platform temperature	80 - 100 ̊C
Cooling fan	80 - 100%
Printing speed	< 100 mm /s
Retraction length	0.8 - 1.4 mm
Retraction speed	20 - 40 mm /s
Internal temperature	45 - 60 °C

density	1 g/cm³
Vicat softening temperature	N/A
Heat distortion temperature	N/A
melting temperature	255 ̊C
Melt Flow Index	29.2±2.1g/10min

Tensile strength	N/A
Elongation at break	N/A
Flexural modulus	N/A
Bending strength	N/A
Impact strength	N/A