[Unboxing and Review] Snapmaker J1 IDEX Independent Dual Spray Nozzles: Assembly and Operation Made Easy!
The long-awaited Snapmaker J1 IDEX standalone dual-printer 3D printer is finally unboxed and tested! Amazing high-speed printing, batch printing capabilities, and automated calibration process—watch the video showcasing the results:
(Skip the tutorial: Watch Print Speed 03:06, Copy Mode 03:08, Two-Color Printing 03:43, Mirror Mode 03:53, 3D Printed Product 03:59)
I. Unboxing Instructions (Video 00:08)
The Snapmaker J1 comes in unique packaging; it's a pre-assembled unit, requiring only the installation of the cable tray, door panel, and backplate. No assembly from scratch is necessary. It's recommended to remove all parts from the box in the order shown on the outer packaging. (Alternatively, refer to the included instruction manual for detailed assembly instructions.)
The Snapmaker J1 comes in unique packaging; it's a pre-assembled unit, requiring only the installation of the cable tray, door panel, and backplate. No assembly from scratch is necessary. It's recommended to remove all parts from the box in the order shown on the outer packaging. (Alternatively, refer to the included instruction manual for detailed assembly instructions.)
Snapmaker J1 Unboxing and Illustration Guide
Major assembly items
1. Wire support frame
2. Lock both front door shutters.
3. Lock the left and right side panels.
II. Correction Process (Video 00:50)
The Snapmaker J1 features an automated calibration process and supports Chinese. Simply follow the on-screen instructions. Each calibration step is displayed on the screen, making it quick and easy.
1. Wire support frame
2. Lock both front door shutters.
3. Lock the left and right side panels.
II. Correction Process (Video 00:50)
The Snapmaker J1 features an automated calibration process and supports Chinese. Simply follow the on-screen instructions. Each calibration step is displayed on the screen, making it quick and easy.
5 calibration steps
1. Leveling the heated bed
2. Z-axis offset calibration
3. XY axis offset calibration
4. Offset calibration verification
5. Vibration compensation calibration
III. Printing Operation (Video 02:53)
This video showcases the Snapmaker J1's two printing modes and dual-color printing; the actual printing process was not sped up. The touchscreen displays the current printhead speed, showing rapid yet precise operation. We'll be unboxing the printing support materials later! Snapmaker enthusiasts shouldn't miss it, so stay tuned!
1. Leveling the heated bed
2. Z-axis offset calibration
3. XY axis offset calibration
4. Offset calibration verification
5. Vibration compensation calibration
III. Printing Operation (Video 02:53)
This video showcases the Snapmaker J1's two printing modes and dual-color printing; the actual printing process was not sped up. The touchscreen displays the current printhead speed, showing rapid yet precise operation. We'll be unboxing the printing support materials later! Snapmaker enthusiasts shouldn't miss it, so stay tuned!
• Copy Mode : This mode allows you to print two identical items at once, making it ideal for mass production. If one printhead encounters a problem during printing, the problematic printhead can be stopped without affecting the running printhead.
Two-color printing
The Snapmaker J1's independent dual printheads prevent cross-contamination between printed cables, creating a clean space between the two types of cables for easy removal and to prevent stains from appearing along the seams.
Mirror Mode : Import half of a model and print it in mirror mode. The printed object will appear symmetrical, like looking in a mirror. This can reduce waiting time by 50%, making it convenient and fast!
IV. Results Display
1. Copy Mode (Video 03:59)
A total of 18 items were printed, which took 6 hours.
Two-color printing
The Snapmaker J1's independent dual printheads prevent cross-contamination between printed cables, creating a clean space between the two types of cables for easy removal and to prevent stains from appearing along the seams.
Mirror Mode : Import half of a model and print it in mirror mode. The printed object will appear symmetrical, like looking in a mirror. This can reduce waiting time by 50%, making it convenient and fast!
IV. Results Display
1. Copy Mode (Video 03:59)
A total of 18 items were printed, which took 6 hours.
2. Combined Product (Video 04:03)
Assemble all the printed items into a LEGO tree. The total time is approximately 11 hours, and different colored threads can be used for printing. You can assemble two trees of different colors!
Assemble all the printed items into a LEGO tree. The total time is approximately 11 hours, and different colored threads can be used for printing. You can assemble two trees of different colors!
.jpg "snapmaker-j1-unboxing-tutorial")
.jpg "snapmaker-j1-unboxing-tutorial")
3. Two-colored shark (Video 04:16)
The Snapmaker J1 has three built-in printable parts, and the shark model has movable joints. The color layering is clean and unblemished.
.jpg "snapmaker-j1-unboxing-tutorial")
The Snapmaker J1 IDEX features independent dual printheads for high-speed printing, unleashing limitless creativity! Suitable for gamers, designers, personal studios, schools, and even businesses, it offers exceptional value for a desktop device!
Did you enjoy this sharing? Snapmaker offers more than just 3D printing . Contact us today to learn more about the Snapmaker series .
Follow our fan page to stay up-to-date with the latest news: https://www.facebook.com/3dmart.com.tw/
https://www.instagram.com/3dmart/