[Unboxing Review] Raise3D E2 3D Printer: A Comprehensive Guide to Independent Dual Extruder Printing!
The Raise3D E2 3D printer features an Independent Dual Extruder System (IDEX). Its two nozzle systems are completely independent and can move separately, preventing interference between nozzles during operation. By selecting either the "Duplication" or "Mirror" modes, both nozzles work simultaneously, achieving twice the efficiency and productivity in the same amount of time! From unboxing to practical use, let's explore it in detail:
1. Hardware Operation
1. Connect / Turn on the power
2. Startup screen
3. Tap "Left Nozzle" > "Load Filament"
4. Load the 3D printing filament
Open the filament holder on the left side of the unit and insert the filament into the designated slot. While holding the metal ring with one hand, pull out the tube with the other hand and feed the filament through the tube. Finally, tap "Start loading filament".
5. Return the tube
Ensure the gears are rotating and insert the filament into the tube. Once the 3D printing filament begins to feed, return the tube to the filament inlet. When you confirm that the filament is extruding correctly, the touchscreen will display "Left Nozzle Filament Loaded".
2. Software Operation
Install "ideaMaker", the dedicated software for the Raise3D E2 3D printer (download here)
1. Select Model
Click the "Printer" toolbar and select the printer model you are using.
2. Import File
Click "Import Model" and select the model you want to print.
3. Select Nozzle
Verify the nozzle with the loaded filament on the hardware side.
4. Adjust Model
You can use functions such as "Move", "Rotate", "Scale", and "Cut" to edit the model file as needed.
5. Start Slicing
You can choose from three basic setting modes. You can also adjust various settings to suit your specific application.
．High-Quality Mode: 0.1mm layer thickness / Higher print quality, but longer print time.
．Standard Mode: 0.2mm layer thickness / Standard print quality and print time.
．Fast Mode: 0.25mm layer thickness / Standard print quality, but shortest print time.
6. Edit Support
Click "Edit" to enter editing mode and select the support structure. Set the support structure to "All", confirm the nozzle to be used for support, then save and click "Slice".
7. Start Printing
Save the 3D print file to a "USB drive", insert it into the USB port on the unit, and click "Start Printing".
The Raise3D E2 3D printer has a maximum build volume of 330 × 240 × 240mm, making it highly suitable for small-batch production in businesses. Please contact us for more details. You can view more information on the Raise3D series 3D printers. Also, follow the 3DMart YouTube channel to check out the latest technology and equipment usage.
Follow our Facebook page to stay updated: https://www.facebook.com/3dmart.com.tw/