[3D Printing Software] How to Use Ultimaker Cloud | Easy Sharing Anytime!
Ultimaker Cloud offers cloud sharing features to streamline your 3D printing workflow. To use Ultimaker Cloud, simply register for an Ultimaker account.
I. Basic Interface
II. Connection Methods
III. How to Use the Marketplace
I. Basic Interface
II. Connection Methods
III. How to Use the Marketplace
(Registration page: mycloud.ultimaker.com)
1. "Printers":
Connect your Ultimaker 3D printer. This screen displays the history of printers paired with your Ultimaker account. The "Team" feature also allows you to share any Ultimaker 3D printer with team members.
(Select the Ultimaker 3D printer you want to connect.)
Before adding an Ultimaker 3D printer group, ensure the printer is powered on and connected to the network. You can start connecting by entering the IP address.
2. "Teams":
Manage your Ultimaker 3D printers. Once you create a team, you can invite other users with an Ultimaker account, and the Teams screen will show all team members.
以下は**記事の最後のお問い合わせ部分（3DMART Japan版）**です。台湾版のリンクは日本版のお問い合わせページへ差し替えてください。
To connect your Ultimaker 3D printer to Ultimaker Cloud for the first time, a Wi-Fi or wired network connection is required. Ultimaker S5 and Ultimaker 3 3D printers should be updated to firmware version 5.2.8 or later, and Ultimaker Cura to version 4.0 or later.
1. Add your network-connected Ultimaker 3D printer to Ultimaker Cura.
2. Log in to Ultimaker Cura with your Ultimaker account.
(Method 1) Using Ultimaker Cura
(When you add an Ultimaker 3D printer in Ultimaker Cura, a blue checkmark appears in the menu.)
Sign in to your Ultimaker account via the login button in the top right corner of Ultimaker Cura (if you don't have an account, you can create one from this screen).
When Ultimaker Cura automatically detects an Ultimaker 3D printer in the cloud, a notification window will appear. Click "Get Started" to initiate the connection with Ultimaker Cloud.
(Method 2) Using Ultimaker Connect
1. Open Ultimaker Cura's Monitor mode and connect using Ultimaker Connect.
2. Click "Go to Ultimaker Connect".
3. Click the gear icon in the menu to configure Ultimaker Connect settings.
4. Click "Connect" to establish a connection with Ultimaker Cloud.
1. Log in with your Ultimaker account.
2. Click "Allow" to permit data reading and sharing between Ultimaker Connect and Ultimaker Cloud.
3. Enter the PIN code displayed on the touchscreen of your Ultimaker 3D printer.
4. Launch Ultimaker Cura to complete the connection.
Once the connection is successfully completed, a notification will appear in Ultimaker Cura, allowing you to remotely view camera footage and configure 3D print jobs.
(*All data in Ultimaker Cloud is strictly protected. Data is shared with Ultimaker or other users, and features such as remote monitoring are enabled only with user consent via OAuth 2.0. Data is encrypted at all stages of transmission, storage, and sharing.)
How was this content? For more detailed instructions on using Ultimaker software, please refer to the official website. For any questions or concerns regarding 3D printing, please do not hesitate to contact 3DMART Japan.
The Ultimaker Marketplace offers additional features for Ultimaker Cura. You can download "Plugins" for CAD software and "Materials" settings for Ultimaker 3D printers.
1. "Plugins"
・Recommended plugins: Provides plugins that can integrate with various software such as SolidWorks and Siemens NX.
・Community-developed plugins: Plugins developed and published by Ultimaker account users.
(Siemens NX Integration)
2. "Materials"
In Materials, you can browse third-party materials in the following three categories:
・Recommended materials: Materials from manufacturers participating in the Ultimaker Material Alliance.
・Recommended materials: Materials from manufacturers participating in the Ultimaker Material Alliance.
・Community-developed materials: Material profiles developed and published by Ultimaker account users.
・Generic materials: Standard material profiles provided by Ultimaker. These are pre-installed and can be used as a base for creating new material profiles.
Click Marketplace in the upper right corner of the Ultimaker Cura screen and install the necessary "Plugins" or "Materials" settings. After installation, restart Ultimaker Cura to use them.
How was this content? For more detailed instructions on using Ultimaker software, please refer to the official website. For any questions or concerns regarding 3D printing, please do not hesitate to contact 3DMART Japan.
For inquiries about Ultimaker products, please feel free to contact 3DMART Japan.
For questions or consultations regarding Ultimaker software and 3D printing, please feel free to contact us via the
3DMART Japan contact form.