1
of
5
Loading...
Phrozen | Product Model:
Phrozen Fluorescent Resin Series (1kg)
Regular price
¥6,000 JPY
Unit price
/
Unavailable
Subtotal
—
Phrozen Fluorescent Resin Series (1kg) - is backordered and will ship as soon as it is back in stock.
Choose add-on
Couldn't load pickup availability
Phrozen Fluorescent Resin Series (1kg)
Regular price
¥6,000 JPY
Unit price
/
Unavailable
Phrozen Fluorescent Resin Series (1kg)
.png)
A wide selection of colors, lighting effects, and endless possibilities for combination.
Four neon colors with light projection can be used in conjunction with other Phrozen resin series.
Create vibrant and lifelike models to create interesting lighting and shadow effects. Add interest to the model and highlight its visual appeal.
Enjoy a colorful and fun 3D printing experience. Make your models more vibrant and lifelike (Model design: Crippled God Foundry)
Please use and store this resin in a cool, dark, and well-ventilated place.
Shake the resin well before use .
After use , please store the resin in an opaque bottle or container and avoid mixing it with new material.
Please keep this material out of the reach of infants and young children and avoid direct sunlight.
Wear gloves and a mask when handling . If the resin comes into contact with skin or eyes, rinse immediately with plenty of water.
Do not dump this material arbitrarily . If you need to discard it, please solidify the material completely and then recycle the solids as "general resources".
*Please note that this resin itself does not have a luminescent/glowing effect.
User Manual: User Guide
SDS Certification:
• Peach Pink (Fluorescent Pink) SDS Certification
• Pumpkin Orange (Fluorescent Orange) SDS Certification
• Lemon Yellow (Fluorescent Yellow) SDS Certification
• Lime Green (Fluorescent Green) SDS Certification
A wide selection of colors, lighting effects, and endless possibilities for combination.
Four neon colors with light projection can be used in conjunction with other Phrozen resin series.
Create vibrant and lifelike models to create interesting lighting and shadow effects. Add interest to the model and highlight its visual appeal.
Enjoy a colorful and fun 3D printing experience. Make your models more vibrant and lifelike (Model design: Crippled God Foundry)
Operation method:
Please use and store this resin in a cool, dark, and well-ventilated place.
Shake the resin well before use .
After use , please store the resin in an opaque bottle or container and avoid mixing it with new material.
Please keep this material out of the reach of infants and young children and avoid direct sunlight.
Wear gloves and a mask when handling . If the resin comes into contact with skin or eyes, rinse immediately with plenty of water.
Do not dump this material arbitrarily . If you need to discard it, please solidify the material completely and then recycle the solids as "general resources".
*Please note that this resin itself does not have a luminescent/glowing effect.
User Manual: User Guide
SDS Certification:
• Peach Pink (Fluorescent Pink) SDS Certification
• Pumpkin Orange (Fluorescent Orange) SDS Certification
• Lemon Yellow (Fluorescent Yellow) SDS Certification
• Lime Green (Fluorescent Green) SDS Certification
Enjoy the high-speed, stable, and high-quality experience of Phrozen photopolymer 3D printers now . They are easy for anyone to use. Contact us now for more information.
| capacity | 1 kg per can |
| density | 1.10 g/cm3 |
| viscosity | 200-350 cps |
| Surface hardness | 76 Shore D |
| Tensile strength at break | 25.1 MPa |
| Tensile modulus | 1129 MPa |
| Tensile strength at break | 20.63% |
| Impact strength of cantilever beam (notch) | 28.98 J/m |
| Heat distortion temperature | 70 ℃ |