1
of
5
Loading...
Magigoo Pro Flex 3D Printing Adhesive
Magigoo | Product Model:
MG006
アドオンを選択
Couldn't load pickup availability
Magigoo Pro Flex 3D Printing Adhesive
Magigoo Pro Flex 3D Printing Adhesive
Magigoo Pro Flex is designed for professional use and can be used with TPU (thermoplastic polyurethane), TPE (thermoplastic elastomer), and TPC (thermoplastic copolyester) filaments. When Magigoo Pro Flex is applied to a work surface, it provides good adhesion, is relatively easy to remove after cooling, and leaves no residue. 
TPU, TPE, and TPC (thermoplastic rubber) are elastic, ductile, highly stable, chemically resistant, and have excellent thermal properties, making them widely used in industrial fields. However, these flexible filaments have low adhesion and are easily bent in general 3D printing applications. Magigoo Pro Flex is designed for TPU, TPE, and TPC (thermoplastic rubber) and can be used with a variety of flexible filaments.
Note: The applicator has an automatic spring valve that will operate automatically when the applicator is pressed against the base plate; do not squeeze the bottle forcefully, otherwise the applicator may pop out; only squeeze the bottle slightly when the tip is pressed against the bed, or when a larger flow rate is required.
Magigoo Pro Flex is designed for professional use and can be used with TPU (thermoplastic polyurethane), TPE (thermoplastic elastomer), and TPC (thermoplastic copolyester) filaments. When Magigoo Pro Flex is applied to a work surface, it provides good adhesion, is relatively easy to remove after cooling, and leaves no residue.
Note: The applicator has an automatic spring valve that will operate automatically when the applicator is pressed against the base plate; do not squeeze the bottle forcefully, otherwise the applicator may pop out; only squeeze the bottle slightly when the tip is pressed against the bed, or when a larger flow rate is required.
| capacity | 50ml |