Bambu Lab P1S 3D Printer Series

One-year warranty & repair instructions

For Bambu Lab equipment purchases, Santima offers a one-year standard warranty or enhanced warranty option . For any operational inquiries, please contact Santima via email.

• We cannot accept additional orders for the "Enhanced Warranty Plan" after shipment . Please confirm the selected warranty plan that meets your needs when placing your order.
• If there is any problem with the machine, please fill out the technical support form .
• Be sure to use the original complete packaging (outer box, protective foam, etc.) and include all original accessories (e.g., power supply, SD card, cable, printing materials used at the time, etc.) to avoid any omissions in the repair process.
• The engineer assessed the damage as caused by human error or unauthorized modification . For non-human-caused damage, original manufacturer repair and warranty services are available. Consumables (such as spray nozzles) and spare parts are not covered under the warranty.
• All operation training is quoted separately by a Sandima specialist. You can fill out the contact form to inquire.

Please note: To ensure the stability of the AMS 2 Pro drying process, please use an official Bambu Lab power supply.
Using a third-party power supply may damage the product, and according to the warranty policy, damaged parts of the product itself are not covered by the warranty.

Topzhu Bambu Lab P1S Combo 3D Printer

* Packaging has been reinforced.

Almost every 3D printing enthusiast dreams of creating stunning works. With the new Tuozhu Bambu P1S , you can print your dream prints with incredible speed and exceptional quality!

Click here for the Topzhu Bambu Lab P1S 3D printer standalone unit.

Ready to use right out of the box
Ready to use right out of the box , setup takes only 15 minutes. You don't need to do anything; simply press the print button , and the printer will handle all the calibrations (automatic bed leveling, vibration compensation). Enjoy trouble-free printing with the P1S.

The acceleration efficiency of 20,000 mm/s² is more than doubled.
The P1S inherits the proven motion control system of the X1 series. It boasts a maximum printing speed of 500 mm/s and accelerates from zero to full speed in just 0.025 seconds.

Vibration compensation and pressure propulsion compensation
Active vibration compensation and pressure advance algorithms make extrusion smoother.

Near-field extrusion
By directly connecting the motor to the extruder, the P1S can better control the extrusion and retraction of consumables, reduce stringing, and make the printed parts smooth and precise.

Automatic leveling and flawless first layer printing
The automatic leveling (ABL) sensor properly calibrates and levels the heated bed, ensuring a smooth and flawless finish for each primary layer.

All-metal hot end
Made of high-temperature resistant materials, it supports high-performance materials such as nylon and polycarbonate. It can be upgraded to a hardened hot end, easily handling carbon fiber reinforced functional plastics.

Material breakage detection
Eliminate the hassle of running out of materials; you can replace consumables and resume printing when the material hopper is empty.

Power outage resume printing
No need to worry about power outages; simply restart printing from where it stopped.

Semi-automatic belt tensioner
Belt tension is crucial for ensuring dimensional accuracy. Resonant frequencies are identified during each run to indicate the need for maintaining proper belt tension.

Fan speed feedback
Monitor fan speed to ensure the fan is always running at the optimal speed.

【P1S Combo Additional Attachments List】

Print size (length × width × height)	256x256x256 mm
frame	steel
shell	Plastic and glass
hot end	All Metal
Extruder gears	steel
nozzle	Stainless steel
Nozzle maximum temperature	300 ℃
Nozzle diameter (default setting)	0.4 mm
Nozzle diameter (sold separately)	0.2 mm, 0.6 mm, 0.8 mm
Tool head cutter	built-in
wire diameter	1.75 mm
Print panel (included by default)	Texture PEI Printing Panel
Print panel (sold separately)	Low temperature printing panel
	High-temperature printing panel
	Engineering Materials Printing Panel
Heated bed supports maximum temperature	100℃
Maximum tool head movement speed	500 mm/s
Maximum acceleration of tool head movement	20 m/s²
Maximum flow rate at the hot end	32 mm³/s @ABS (Model: 150*150mm single-layer outer wall;)
Maximum flow rate at the hot end	Wire material: Bambu ABS; Temperature: 280℃
Component cooling fan	Closed-loop control
Hot end fan	Closed-loop control
Auxiliary component cooling fan	Closed-loop control
Control board fan	Closed-loop control
Body temperature regulating fan	Closed-loop control
PLA, PETG, TPU, ABS, ASA, PVA, PET	Suitable for printing
Nylon wire (PA), polycarbonate wire (PC)	Can print
Carbon/glass fiber reinforced wire	Not recommended
Main unit casing surveillance camera	Low frame rate camera 1280 x 720 / 0.5fps (optional)
Main unit casing surveillance camera	Supports time-lapse photography
Material breakage detection	support
Wire material usage and surplus material inspection	Supports when used with AMS
Power outage printing resume	support
Product dimensions (length × width × height)	389 x 389 x 458 mm
Packaging weight	21.6 kg
Input voltage	100-240 VAC, 50/60 Hz
Maximum power	1000W@220V, 350W@110V
USB output	5V/1.5A
Display screen	2.7-inch, 192x64 screen
Connection method	Bluetooth, Bambu-Bus
storage	Micro SD card
User interface	Buttons, mobile app, PC application
motion controller	Dual-core Cortex-M4 processor
Slicing software	Bambu Studio
Slicing software	It supports other vendor slicers that can export standard G-code, such as Superslicer, Prusaslicer, and Cura, but some smart features may not be supported.
The slicing software supports operating systems.	MacOS, Windows
Products include	Bambu Lab P1S Stainless steel hot end nozzle Bambu textured PEI board Bambu PLA cable unclogging pins tool power cord accessory box Bambu Lab AMS Automated Feeding System Spare Wire Cutter x2 Bambu Bus Cable - 6 Pin Bambu Bus Cable - 4 Pins Bambu PLA cable x1 Bambu cable (random) x2

Authorized and certified by the National Communications Commission (NCC)※

One-year warranty & repair instructions

For any Bambu Lab equipment purchases, SanDima provides a one-year warranty and maintenance service . For any operational questions, please contact SanDima via email .

• If the machine malfunctions, please fill out the technical support form first. If the engineer assesses that the damage is not caused by human error, the following two methods can be used:

🔧【 Customer DIY Parts Repair】
We will ship the parts to the designated location free of charge → Customers will assemble the parts themselves.

👨‍💻【Sandyma Engineer Repair Service】
1. Original packaging available → Pay shipping + repair fee $2000 → Sandima dispatches a vehicle to pick up the machine → Sandima engineer performs maintenance → Sandima dispatches a vehicle to return the machine after completion
2. No original packaging → You are responsible for arranging your own shipping or retrieval costs → Send to Sandima Co., Ltd. → Sandima engineers will repair the machine → After completion, retrieve the machine from Sandima Co., Ltd.

• The engineer assessed the damage as caused by human error or unauthorized modification . For non-human-caused damage, original manufacturer repair and warranty services are available. Consumables (such as spray nozzles) and spare parts are not covered by the warranty.
• All operation training is quoted separately by a Sandima specialist. You can fill out the contact form to inquire.

Bambu Lab P1S 3D Printer Series

Your cart

Choose options