Magigoo Pro PC 3D Printing Adhesive

Magigoo Pro PC 3D printing special adhesive

The Magigoo series is a specialized adhesive for 3D printing , designed to maintain stable positioning during the printing process and facilitate easy removal after printing, solving some of the troublesome problems encountered in 3D printing . MAGIGOO PC is designed for professional use, specifically for polyamide filaments, and is relatively easy to remove after cooling, with easy removal of adhesive residue.

PC 's strength and toughness make it an ideal material for FDM machines in the production of functional prototypes and final parts. PC has a high glass transition temperature (Tg), so it can be used in high-temperature applications; however, this characteristic also makes PC prone to large warpage when the printing platform temperature is insufficient (<130ºC).



While some manufacturers improve adhesion through plasticizers or by mixing with other materials , it remains an issue when 3D printing large parts; Magigoo PC can be used on glass or other surfaces. It is recommended for use on other plastic surfaces to provide strong adhesion.
It is compatible with a variety of PC cable brands, but the configuration may vary as the composition of each plastic is slightly different.



MAGIGOO PCs are designed and tested to work with various PC and cable brands:

• Shake the bottle. • Press the pen tip (to open the inner valve) and apply as needed to the desired area. • Perform 3D printing according to the manufacturer's recommendations for the filament/ 3D printer.
• Wait for the product to cool and remove it. • Clean with a damp cloth.

Notice:
Using this product on materials other than PC wires may result in excessive adhesion and damage to the surface of the finished product.

Tip:
If the adhesion is too strong, it is recommended to wet the printing platform with a small amount of water and let it slowly penetrate under the object. This will make it easier to disassemble the parts.