The Flux Beam Air Pro air purifier, designed specifically for laser cutting, has been newly upgraded. Equipped with a three-layer filtration system that offers superior filtration efficiency compared to the Beam Air, it effectively captures dust and blocks odors, minimizing the smell of laser cutting in your creative space. The Beam Air Pro's wide air inlet design allows for compatibility with all FLUX models and various laser cutting machines from different brands, ensuring optimal air quality in your creative environment!
• 3-layer high-efficiency filter
The Beam Air Pro features a sleek, slim design that takes up minimal space, allowing it to be placed under your desk and seamlessly integrate into your personal space. Its caster base makes it easy to move around effortlessly! 
Three-stage filtering, with strict controls at each level.
It adopts a high-quality three-layer filter, including a pre-filter layer, a high-efficiency filter layer, and a low-pass filter layer.
The low-pass filter layer uses catalytic activated carbon and a U16 laboratory-grade ULPA ultra-low-pass filter to powerfully filter dust generated during laser engraving, providing you with multiple layers of protection. 
Made of high-quality glass fiber with a thickness of 10 mm, the pre-filter captures large particles generated during laser engraving, acting as the first line of defense for air quality in the work area.
✔️Wood tar particles ✔️Acrylic dust (acrylic residue) ✔️Cellulose particles ✔️PM10
High-efficiency filter layer
It uses a medical-grade H13 HEPA filter, with a larger filtration area than Beam Air, reaching 6m². The high-efficiency filter layer can effectively capture extremely fine particulate matter generated during laser engraving, ensuring the removal of contaminants as small as 0.3 microns. 
✔️PM2.5 ✔️PM10
Low-pass filter layer
The low-pass filter uses thicker catalytic activated carbon than Beam Air and a U16 laboratory-grade ULPA ultra-low-pass filter, which can capture extremely fine particles larger than 0.12 microns, effectively purifying the creative space. 
✔️PM 2.5 ✔️PM10 ✔️TVOC ✔️HCHO
Automatic air volume control
Beam Air Pro features active airflow control, which increases airflow when the filter is nearing the end of its life, ensuring the filtration system operates at maximum efficiency and maintains its performance.
The intelligent panel on the laser air purifier calculates the lifespan of each filter layer. If a filter is nearing the end of its lifespan, the panel will immediately remind you to replace it, ensuring the highest quality of air purification. 
Smart panel tracks filter life
Triple noise reduction design
The Beam Air Pro features a triple noise reduction design. In addition to sound-absorbing foam around the internal fan, it also has dedicated noise-reducing shells on the back and bottom of the machine to promote exhaust noise reduction and ensure a quieter operating environment. 
Smart Connectivity
Connect the Beam Air Pro to any FLUX laser engraving machine via USB-B. As the laser cutter starts and stops working, the Beam Air Pro will also be activated and in standby mode, saving you repetitive actions and valuable time. 
Manually adjust the air volume
The Beam Air Pro features an adjustment knob that allows you to flexibly adjust the airflow, so you don't have to worry about the noise affecting your creative process. 
| weight | 17 kg | 49 kg |
| size | 490 x 260 x 470 mm | 682 x 384 x 608 mm |
| Filter layer | Pre-filter layer, medium-efficiency filter layer, activated carbon filter layer, medical-grade high-efficiency filter layer | Pre-filter layer, H13 HEPA high-efficiency filter layer, low-flow filter layer (containing catalytic activated carbon + U16 ULPA ultra-low-flow filter layer) |
| Filter replacement reminder | - | have |
| Smart light indicator | - | have |
| Automatic air volume control | - | have |
| Applicable to FLUX laser cutting models | beamo / Beambox (Pro) / Ador | Beambox (Pro) / HEXA |
Contact us now to learn more about the FLUX series equipment and various application examples of laser cutting/engraving technology .
Product Specifications
| Weight | 49 kg |
| Dimensions | 682 x 384 x 608 mm |
| Inlet diameter | Φ 100mm |
| Outlet diameter | Φ 118mm |
| Operating sound level | < 80 db (A) |
| Power requirements | 100 - 250V |
| Filter layers | Pre-filter layer, H13 HEPA high-efficiency filter layer, low-flow filter layer (including catalytic activated carbon + U16 ULPA ultra-low-flow filter layer) |
| Ambient temperature | 10-35 ℃ |
| Ambient humidity | Ambient temperature below 15℃, minimum relative humidity 30% |
| I/O port | USB-B |
| Compatible models | Flux Lasers and all brands of laser cutters |