Bambu Lab Purifier E1 Air Purifier
Captures 3D printing emissions at the source, making air management in the printing area smarter.
Designed exclusively for Bambu Lab 3D printers. Combines source capture, three-stage filtration, smart synchronization, and low-noise operation to provide comprehensive air management during printing.
Captures emissions at the source and filters them before they disperse
The Bambu Lab Purifier E1 is designed for 3D printing environments and can be connected directly to the chamber of a compatible 3D printer.
By creating negative pressure through suction, it draws airborne contaminants generated during printing into the filtration system, reducing the chances of emissions leaking directly into the room.
Compared to systems that circulate and filter contaminants after they have dispersed throughout the room, source capture focuses on real-time air management during printing.
Three-stage filtration system with particle filtration efficiency up to 99.97%
The Purifier E1 uses three filters. It captures particulate matter using different filtration mechanisms and adsorbs some odor molecules.
According to the provided product documentation, the filtration efficiency for 0.3 μm particles reaches up to 99.97%.
The multi-layer filtration design reduces some airborne contaminants generated during 3D printing and enhances the air management capabilities of the printing environment.
Regarding filtration efficiency: 99.97% is the particle filtration rating for the specified particle size and test conditions. This rating does not apply to all gases, VOCs, and other contaminants. It also does not mean that 99.97% of airborne contaminants in the entire room can be reduced.
Efficient, quiet, and smart synchronization with the printing workflow
The Purifier E1 integrates with the workflow of compatible 3D printers and can start automatically when printing begins.
It continues operating after printing is complete to help process any airborne contaminants remaining in the chamber.
It adjusts the suction level according to the requirements of the material to maintain an appropriate balance between air treatment and conditions inside the printing chamber.
Automatic Start
Starts air filtration in accordance with the printing workflow to reduce manual operation.
Continues Operating After Printing
After printing is complete, it can continue processing the air remaining in the chamber.
Smart Suction Control
Adjusts airflow according to compatible equipment and material settings to meet both filtration and printing requirements.
As quiet as 38 dB, blending quietly into your workspace
The Purifier E1 features an acoustic damping structure to reduce vibration and noise during operation.
In quiet mode, the operating noise is as low as 38 dB, approximating the noise level of a quiet indoor environment.
In design studios, offices, personal workspaces, and other environments, the low-noise design reduces the impact of the device's operation on work.
Check the status at any time and easily operate remotely
The Purifier E1 integrates with Bambu Handy and Bambu Studio to allow you to check air quality information in a compatible equipment configuration.
Because the air purifier settings can be adjusted from the compatible software interface, there is no need to operate the device in person every time.
Integrates printing and air management into the same workflow to enhance everyday convenience.
Optional enhanced filters expand use with high-performance materials
For users who use high-performance materials or special processing methods, the Purifier E1 is available with an original enhanced filter.
The enhanced filter uses catalytic oxidation technology to improve the processing capability for some odors and gaseous contaminants.
For actual compatible materials, target contaminants, and filtration performance, please check the manufacturer's specifications and test conditions for the corresponding filter.
Note: The enhanced filter is sold separately. When using special engineering materials, please ventilate properly in accordance with the material's safety data sheet and workspace requirements. The air purifier is not a substitute for necessary safety measures.
Bambu Lab Purifier E1 Package Contents
Please check the product packaging and accessories. The actual contents are subject to the version purchased and the manufacturer's shipping list.
Safety Precautions and User Guide
To use the Purifier E1 normally and safely, please read the following precautions before installation, operation, and maintenance.
01｜Pre-Use Inspection
- Check that the air purifier's exterior is normal and free of obvious damage.
- Check that the power switch is off.
- Check that the filter is correctly installed inside the unit.
02｜Installation Space and Placement Requirements
- Leave at least 5 cm of space in front of the air purifier and at least 20 cm behind it.
- Do not excessively bend, fold, or knot the connection hose, as this may obstruct airflow.
- Do not place objects on top of the air purifier.
- Do not tilt, lean on, or sit on the unit.
03｜Power and Cable Safety
- Always use the power cord supplied with the air purifier.
- To prevent damage or exposure of the internal wiring, do not excessively twist, bend, or knot the power cord.
- Before performing maintenance or moving the unit, turn off the power and unplug the power cord.
- Do not pull the power cord when moving the unit.
04｜Usage Restrictions and Important Warnings
- The Purifier E1 is designed exclusively for Bambu Lab 3D printers and is intended to filter emissions generated during 3D printing. Do not use it to capture smoke from laser processing.
- This product cannot remove carbon monoxide (CO) or radon (Rn). Do not use it as a safety device in combustion accidents or hazardous chemical accidents.
- When using it in the same environment as household gas appliances such as gas stoves or gas water heaters, always ventilate the room properly to prevent carbon monoxide poisoning.
- Do not put liquids, powders, combustibles, or other foreign objects into the air intake or exhaust vents.
05｜What to Do in Case of Abnormalities
If any of the following symptoms occur, stop using the product immediately.
- Abnormal noise
- Unusual odor
- Abnormally high temperature
- Irregular fan rotation
- Significant filter clogging
If you notice any abnormality, turn off the power and unplug the power cord immediately, ensure safety, and open a window to ventilate. Do not use the product until the problem is resolved.
06｜Filter Maintenance and Replacement
- If the filter is significantly clogged, stop using it immediately, turn off the power, and unplug the power cord.
- Continuing to use a clogged filter may affect the performance of the device and shorten its lifespan.
- When replacing the filter, use an original Bambu Lab filter to maintain the specified filtration performance.
- For replacement instructions, please check the Bambu Lab E1 Air Filter Replacement Guide .
Bambu Lab Purifier E1 Official Installation and Maintenance Guide
Before installing the product or replacing the filter, we recommend reading the Bambu Lab official Wiki.
View the official installation guide View the filter replacement instructions