Bambu Lab ABS Series
Bambu Lab ABS Series - is backordered and will ship as soon as it is back in stock.
Choose add-on
Couldn't load pickup availability
Bambu Lab ABS Series
Features
• Sturdy and durable
• It has good heat and cold resistance.
• Comes with a high-temperature reusable reel
• Diameter: 1.75mm +/- 0.03mm
Accessories compatible
| Recommended | Not Recommended | |
| Build Plate | Engineering Plate, High Temperature Plate or Textured PEI Plate | Cool Plate |
| Hotend | All Size / Material | / |
| Glue | Bambu Liquid Glue Glue Stick |
/ |
Smart Printing • RFID Technology
All printing parameters are embedded in RFID and can be read via our AMS (Automated Material System).
Simply load and print! No more tedious setup steps.
Printing Techniques
• A pungent and unpleasant odor may be released during the printing process. Please ensure that your printer is placed in a well-ventilated area.
• Drying conditions: 80℃, 8 hours. Store in a dry environment after use. If the material is hygroscopic, dry it before use. For more details, please refer to the cable drying instructions on the WIKI .
• ABS is prone to warping when printing large-size and/or high-infill-density models. To avoid warping:
1. Printing excessively large and/or high-fill-density models is not recommended.
2. Use a closed-loop printer and ensure that the printing plates are correctly attached before printing.
3. Set a lower print speed and a higher heated bed temperature. For more details, please see: Common Print Quality Issues and Solutions on the WIKI .
Packaging contents
Wire *1 & Desiccant *1
Instruction manual *1
&Spool Sticker *1
Outer packaging *1
Cable label *1
Print your spools now!
The Bambu Lab 3D printer comes with a roll model. Print the roll from the built-in file.
| diameter | 1.75 mm |
| Net weight of wire | 1000 g |
| spool material | PC+ABS (temperature resistant to 90°C) |
| spool size | Diameter: 200 mm; Height: 67 mm |
| Pre-print drying settings | 80 °C, 8 hours |
| Printing and storing humidity | < 20% RH (sealed with desiccant) |
| Nozzle temperature | 240-270 ̊C |
| Printing plate type | Low-temperature plate, high-temperature printing platform , or textured PEI platform |
| heated bed temperature | 30-35 ̊C |
| Cooling fan | 100% |
| Printing speed | < 200 mm/s |
| Retraction length | 0.8 - 1.4 mm |
| Retraction speed | 20 - 40 mm/s |
| Internal temperature | 25 - 45 ̊C |
| Maximum overhang angle | 70 ̊ |
| Maximum bridging length | 20 mm |
physical properties
| density | 1.05 g/cm³ |
| Vicat softening temperature | 94 ̊C |
| Heat distortion temperature | ISO 75 1.8 MPa: 84 °C / ISO 75 0.45 MPa: 87 °C |
| melting temperature | 200 ̊C |
| Melt Flow Index | 34.2 ± 3.8g / 10 min |