Phrozen Sonic Mega 8K S LCD Photopolymer 3D Printer
Phrozen Sonic Mega 8K S LCD Photopolymer 3D Printer is backordered and will ship as soon as it is back in stock.
Choose add-on
Couldn't load pickup availability
Phrozen Sonic Mega 8K S LCD Photopolymer 3D Printer
Sonic Mega 8K S LCD Photopolymer 3D Printer (Pre-order)
Your trusted productivity tool
Phrozen Sonic Mega 8K S The LCD photopolymer 3D printer is suitable for high-speed, high-volume production . It can print an average of 600 layers per hour, and the 8K print quality will further enhance your productivity, allowing you to create your own 3D printing factory at home!
Print 80 models in 1.5 hours
The Sonic Mega 8K S's 15-inch perforated build board is known for its high print volume, easily printing up to 80 1/32 soldier models at a time.
Production efficiency increased 10 times
Say goodbye to slow production and increase printing speed by 10 times with the Sonic Mega 8K S and these 3 key components:
1. A brand-new high-speed system enables faster printing speeds.
2. ACF release film reduces suction and lowers the lifting height.
3. Low-viscosity resins, such as TR300, can accelerate the curing speed.
Featuring a flip-up lid – saves space and is more convenient!
Before After
Because of limited workspace, it's easy to be unsure where to put acrylic covers. With a flip-top cover, you'll never forget where to put the cover again; a clumsy movement might just result in placing it there. It takes up less workspace.
Even if you accidentally knock over the printed product, it still allows you to easily access and retrieve it.
Safer and more efficient resin saving
Before After
Due to its weight, it would easily fall around the work area, posing a significant danger. The built-in drip holder, made entirely of metal, provides a safer and more convenient way to preserve every drop of printed resin.
Sonic Mega 8K S Finished Product:
The Phrozen Sonic Mega 8K S boasts groundbreaking advanced performance, enabling 3D printing of ultra-large sizes while maintaining printing precision and quality. It saves significant production time and material usage, delivering the most efficient photopolymer 3D printing experience. Contact us now to learn more about Phrozen photopolymer 3D printers .
* The original LCD screen is a consumable item and is covered by a three-month warranty against non-human-caused damage.
| system | Phrozen OS |
| Equipment size | 47.2 x 38 x 56.6 cm (Length x Width x Height) |
| Print size | 33 x 18.5 x 30 cm (Length x Width x Height) |
| weight | 26 kg |
| operate | 3.5" Touchscreen |
| Slicing software | CHITUBOX V1.9.6 and above (or other software) |
| connect | USB |
| Design Technology | Resin 3D Printer - LCD Type |
| light source | 405nm ParaLED® Matrix 3.0 |
| Release film | ACF Film |
| XY resolution | 43µm |
| Layer thickness | 0.01-0.30 mm |
| Average printing speed | 400 floors/hour |
| Power requirements | AC100-240V; 50-60Hz |
| System maximum power | 240 W |