[Unboxing and Hands-on Review] Phrozen Sonic Mighty 8K Review: Incredibly Detailed Model Immediately Available! Marvel Universe, Hurry Up!
Marvel is constantly releasing movies and TV series, are you keeping up? No worries if you haven't! Get on board with the hottest topics with 3D printing ! A complete tutorial on Phrozen Sonic Mighty 8K photopolymer 3D printing , including unboxing, software, and equipment operation videos, is available now:
I. Z-axis calibration (Video 00:19)
After unpacking the outer box, place the 3D printer on the platform, tear off the protective film, lift the full-coverage top cover, and take out the accessories, including connecting cables, spatulas, gloves, funnels, USB, etc.
1. Loosen the four fixing screws to remove the resin tank, and loosen the left and right fixing screws of the printing platform (the printing platform does not need to be removed).
After unpacking the outer box, place the 3D printer on the platform, tear off the protective film, lift the full-coverage top cover, and take out the accessories, including connecting cables, spatulas, gloves, funnels, USB, etc.
1. Loosen the four fixing screws to remove the resin tank, and loosen the left and right fixing screws of the printing platform (the printing platform does not need to be removed).
2. Place the paper and start with one click.
Place a piece of paper on the LCD panel, and after clicking "Z-axis control" on the touch screen, the printing platform will automatically descend until it is flush with the bottom LCD panel.
Place a piece of paper on the LCD panel, and after clicking "Z-axis control" on the touch screen, the printing platform will automatically descend until it is flush with the bottom LCD panel.
3. Locking screws, retractable printing carrier
After completely flattening the bottom paper and LCD panel, tighten the four screws on the left and right sides of the platform again. Finally, click "Done" on the screen, and the platform will rise to the top again to complete the calibration.
(Confirm the above 3 steps and follow the on-screen instructions, then lock the resin tank to begin printing.)
II. 3D Model Slices (Video 02:32)
Phrozen Sonic Mighty 8K photopolymer 3D printing uses the Chitopia slicing software.
1. Select "Settings" to enter the settings page.
2. Click the "Add" icon to enter the device selection interface and find the specified 3D printer " Phrozen Sonic Mighty 8K ".
3. Choose to use resin.
4. By importing 3D model files, users can adjust the detailed parameters according to their preferences and printing conditions.
5. After the data is set, drag the right slider to view and simulate the actual molding process. Before starting 3D printing, check whether each overhang of the model is fully supported.
Finally, select "Slice" to obtain the model slice file. After the software performs calculations, it will display detailed information, including the material resin type and printing time. After saving the file to a USB, upload it to the machine, and start printing after reading it in the Phrozen Sonic Mighty 8K .
III. Preparing for 3D Printing (Video 01:35)
1. Pour in the resin
Pour the resin into the resin tank and stir it evenly with a spatula.
2. Cover with the full-face cover.
3. Select File
Insert the USB drive, select the 3D model file, and then select the file to be printed on the touchscreen.
4. Start printing
Finally, select "Print" to begin 3D printing.
IV. Post-processing of finished products (Video 02:32)
After the 3D printing process is completed, the surface of the model will be covered with resin liquid. This time, we used the WANHAO BOXMAN-1 UV post-curing lamp to cure the model and disassemble the model support structure.
III. Preparing for 3D Printing (Video 01:35)
1. Pour in the resin
Pour the resin into the resin tank and stir it evenly with a spatula.
2. Cover with the full-face cover.
3. Select File
Insert the USB drive, select the 3D model file, and then select the file to be printed on the touchscreen.
4. Start printing
Finally, select "Print" to begin 3D printing.
IV. Post-processing of finished products (Video 02:32)
After the 3D printing process is completed, the surface of the model will be covered with resin liquid. This time, we used the WANHAO BOXMAN-1 UV post-curing lamp to cure the model and disassemble the model support structure.
1. Disassemble the download console
Along with the 3D printing model, disassemble the printing platen.
2. Remove the model
Use a scraper to scrape the finished product off the platform.
3. Clean the surface
Soak the model in alcohol to clean off any remaining resin on the surface.
4. Solidified Model
Use a UV post-curing lamp to quickly cure 3D printed models .
V. Finished Product Display
The total printing time for Moon Knight 3D was 7 hours.
Along with the 3D printing model, disassemble the printing platen.
2. Remove the model
Use a scraper to scrape the finished product off the platform.
3. Clean the surface
Soak the model in alcohol to clean off any remaining resin on the surface.
4. Solidified Model
Use a UV post-curing lamp to quickly cure 3D printed models .
V. Finished Product Display
The total printing time for Moon Knight 3D was 7 hours.
Did you enjoy this sharing? Want to know what else an LCD photopolymer 3D printer can print? ( Click to see ); We offer more than just 3D printing . Contact us now to learn more about Phrozen Sonic Mighty 8K photopolymer 3D printing .
Free model download
Free model download
Follow our fan page to stay up-to-date with the latest news: https://www.facebook.com/3dmart.com.tw/