[Cura Tutorial ] Advanced Settings Tutorial Course - Special Extra Session

Thank you so much for registering for Cura's advanced teaching course! Please note that the first session is now full.
But don't worry if you missed the first session! We've added an extra session, which is also completely free. If you missed the registration deadline for the first session, hurry and register now!

There are many versions of Cura, with more than 200 adjustable items. Do you have a full understanding of all the settings in Cura?
Most users, like myself, probably only use a few basic parameters such as layer thickness, fill power, and speed.
Therefore, 3DMART has compiled a list of key items that you might not normally use.
However, there are a few settings that can improve the quality of your prints or make it easier for you to use.
Most importantly, it's "completely free" ! Offered to customers who purchase printing equipment from 3DMART!
This is a rare opportunity with limited spots available. Click the registration page now to seize the chance to improve your 3D printing skills!

Course Title: Cura Advanced Setup Tutorial Target Audience: Clients using Cura as their slicing software Course Date: Additional Session: October 2nd, 2017 (Monday)
Course time: 15:00-16:30
Course sessions/hours: 1 session/90min
Course Location: 3DMART Taipei Headquarters Training Fee: Additional sessions are offered free of charge only to customers who have purchased equipment from 3DMART!

[Registration Link]
https://drive.google.com/open?id=15Ub5K68XXlcuo8qF0n_-DEA77gYOe3B5k0z2TnIWwi4

【syllabus】
Introduction to Cura's basic interface, two-color printing operation, automatic pause for changing materials or parameters, fill methods, tolerance adjustment, surface quality improvement, drawing error repair, special modes, and case studies.

[Course Content]

1. Two-color printing
2. Automatically change parameters or pause material retraction at a certain layer.
3. Infilling between walls
4. Horizontal expansion
5. Layer change points of objects
6. Z-Hop
7. Avoid printing objects
8. Fan cooling
9. Supports horizontal expansion
10. Overlapping Block Integration
11. Remove holes from objects
12. Extensive splicing
13. Special Mode
14. Experimental Mode

[Course Instructor]

Mr. Chen Zhaoru, Business Engineer of San Di Ma

Target audience

Customers who need to use Cura as their 3D printing slicing software

[Number of students enrolled]

10 people (1 person per company)

[Registration Method]

Please fill out the form below.
https://drive.google.com/open?id=15Ub5K68XXlcuo8qF0n_-DEA77gYOe3B5k0z2TnIWwi4

[Relevant Regulations]

The company reserves the right to change courses and adjust schedules. Any changes to the course or teaching time will be communicated in advance.

[Contact Information]

San Di Ma Co., Ltd.

Address: 9F-5, No. 1, Baosheng Rd., Yonghe District, New Taipei City
Telephone: (02) 22316389
E-mail: client@3dmart.com.tw
Website: https://3dmart.com.tw/