【Unboxing & Hands-on】A Complete Guide to Unboxing and Using the CtrlAX – 3DMart Japan

【Unboxing & Testing】CtrlAX Ultrasonic Cutter Unboxing & Operation Guide!

High-Quality, Multi-Function Cutter
The Cutra CtrlAX Ultrasonic Cutter is the second-generation model of the Wondercutter, featuring 1.6 times the power output. It produces 40,000 vibrations per second and can use various types of blades depending on the application. It is sturdy, quiet, and offers adjustable power output, making it highly user-friendly. This article provides a detailed look at what is in the box, how to use it, and our actual test results. Get all the information you need on the CtrlAX right here!

Unboxing!!

Contents

For detailed information on the usage of each blade, please check here (scroll down to the bottom of the linked article).

Package Contents:

• CtrlAX x1
• CX-Basic (Standard Blade) x40
• CX-Long (Long Blade) x3
• CX-Saw (Saw Blade) x3
• CX-Dig (Digging Blade) x3
• CX-Half (Narrow Blade) x3
• Torque Wrench x1
• Torque Wrench Replacement Head x1
• Conversion Adapter x1
• Set Screws x3
• Chuck x1
• Test Board (Foam Board) x1
• User Guide x1

Basic Information

How to Use

Operating Steps

1: Power On - Press and hold the Power Button for 2 seconds.
2: Press and hold the Operation Button on the handle to cut.
3: Power Off - Press and hold the Power Button for 2 seconds.

Continuous Operation Mode

Operating Steps

1: Press and hold the handle Operation Button, then press the Power Button.
2: Press the Power Button to toggle between different output modes.
3: Press the Operation Button again to exit Continuous Operation Mode.

Output Modes

There are 3 modes in total: Eco Mode, Comfort Mode, and Sports Mode, with output set from lowest to highest.

Performance Test Results

Now that you've seen the unboxing and basic operation guide, let's check out the actual cutting performance!
-
We tested it by cutting 5 different materials. All tests were conducted in Sports Mode at maximum power.

- 3D Printed Model -

First is a cutting test on support structures for a 3D printed model. With the CtrlAX, support structures can be removed quickly and easily, taking only a few seconds. Almost no pressure is required, and there is barely any residue left on the cut surface!

- Thick Leather -

Second is a cutting test on thick leather. The staff reported that they applied almost no downward pressure while cutting. Even so, they were able to cleanly cut out a rectangular piece in just a few passes!

- Wooden Board -

Third is a cutting test on a wooden board. It cut through in no time at all!

- Thin Leather -

Fourth is a cutting test on thin leather. It was cut smoothly in a single pass.

- Foam Board (Included) -

Finally, a cutting test on the foam board. The cutting was completed swiftly as well!

In summary, the CtrlAX ultrasonic cutter is quiet, fast, and capable of cutting various materials with minimal effort. It is a highly convenient tool suitable for a wide range of applications! For more product features and detailed information, please see the product info below or contact us.

Product Information
1) CtrlAX Ultrasonic Cutter

Stay updated:
Facebook : https://www.facebook.com/3dmart.com.hk/
Instagram : https://www.instagram.com/3dmart
LinkedIn : https://www.linkedin.com/company/3dmart/

【Unboxing & Hands-on】A Complete Guide to Unboxing and Using the CtrlAX Ultrasonic Cutter!

Your cart

Choose options